M60 Alarm Autodialer Standard Features |
The M60 Alarm Dialer comes with many features as standard. Most are user configurable via the in built menu, others have to be “turned on” and or configured in the factory. When ordering please make it clear which features you require.
Even though we try to include all the features the average user many require as standard, they may be occasions where you want the M60 to work in a different way or be more autonomous, in that case please have a look at the various upgradable optional features.
4, 8, 16 or 56 Alarm Inputs |
The M60 Autodialer comes with 4, 8 or 16 digital inputs as standard, this can be increased up to 56 digital inputs with the M60 ADE Panel. Digital inputs are volt free change of state/switched inputs that can be either normally open or normally closed, inputs can be momentary or latched. |
Emergency Channels |
One or more inputs of the M60 Autodialler can be designated as an ‘emergency channel’ and when activated it can initiate an alternative Duty Roster to alert different staff e.g. Security staff as opposed to Maintenance staff.
|
|
Remote Interrogation |
The M60 can be interrogated (called) from any land phone or mobile phone to check the current status i.e. whether 'all conditions are normal', and to check that both the telephone line and the M60 are operational.
|
|
Cancelling Alarm Calls |
Once the alarm message has been received the recipient can telephone the M60 Autodialer to cancel further dial outs, thus saving all personnel on the duty roster from having to respond to the call.
|
Communication Mediums |
(How the M60 can send an alarm to you)
The M60 can automatically switch to the GSM network in the Event of a landline failure (Optional Extra).more-info |
Communication Devices |
(What you can receive an alarm on)
|
|
A wide range of pagers are compatible as standard with the M60 e.g. Vodapage, B.T and Mercury pagers are all compatible.
|
|
3 Duty Rosters |
The M60 comes with 3 Duty rosters as standard. Each roster can hold up to 5 phone numbers. (Expandable) |
Dial out Sequence |
Upto 5 telephone numbers per roster can be dialled on a standard dial out sequence. (This can be increased to 10)
|
|
Inhibit Alarm Channels |
Where one more channels are for information only and or not required to initiate an alarm dial out, they can be hidden and the information only provided when then M60 is interrogated or where a standard (non inhibited) alarm becomes active.
|
|
Inter Dial Out Pauses |
The pause between each dialled number can be independently programmed to suit customers own response procedures. Default is 2 Minutes
|
|
Alarm Input Delays |
The M60 Autodialer is pre-programmed with a ‘Input Delay’ to stop erroneous alarm calls due to momentary alarms e.g. power dips. For example to M60 must have an active alarm input for 60 seconds before it will dial out. Default is 60 Seconds
|
M60 Built in Outputs |
|
|
Low Battery Alarm |
The M60 Autodialer Provides an alarm output to signal that the integrated battery backup is about to expire.
|
|
Auxiliary Alarm Output |
The M60 Autodialer Provides an Closed Circuit alarm output to signal that that an alarm has been activated. This is only active during the initial alarm input delay period.
|
|
ON/OFF Isolate |
The M60 Autodialer can be switched on or off to stop it dialling out via its keyswitch. e.g. During the day when the M60 is not used or during onsite maintenance.
|
Lightning/Surge Protection |
The following features are designed to offer maximum protection against damage by electrical storms, lighting and power surges
We can also supply optional additional telephone and electrical surge protection. |
User Recordable Real Speech |
A user can record in real speech a bespoke alarm message for every individual alarm channel and also a universal site identification message. So for example instead of getting “channel 6 alarm” you would get “This is acmes main site, generator on shed 2 alarm”.
|
|
Battery Backup |
The M60 Autodialer comes with a integrated Battery backup as standard.
|
Power Supply |
Supply
Current
|
999 Approved |
The M60 Autodialler is the only Alarm Dialer on the market that is approved to dial 999 to call the Police or Fire services.
|
|
M60 Enclosure |
|
|
[M60] [Std Features] [Op Features] [GSM] [SMS] [Expander] [What is the M60] [Blog] [Downloads] [Contact Us] [Privacy & Cookies]
[Desktop Version]
The M60 is a Packs Infotel Product.
© Packs Infotel Ltd 1998 -